Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Flywheel $40
Torque Converter $50
2 90 intake elbows $50 each SOLD!!
1 throttle body $50
Transmission Plate $10
Accessory brackets (come with most of mounting hardware):
Set with tensioner $175
Set W/O tensioner $150
Not in picture:
Mechanical fan (metal) and fan clutch $30
fuel rail $20
Last edited by cee21 on Sat Mar 23, 2013 2:39 pm, edited 1 time in total.
Yup, got them both. Through paypal is the safest, protects us both. Which one do you want? The one on the right is exclusively 96 the other is 97 and up. Want me to take some closer pictures?
Don't know enough to know the difference. I'm building a 90 ranger and currently the intake is deadheaded into the side of my A/C box. What do you recommend? Give me your paypal info and I'll start the process. What about shipping?
1990 Ranger ext. cab soon(?) to be 5.0 and T-5
2000 F-150 ext. cab 240,000 miles no guts but it looks good
Hey bigburl, I had to create another profile cause I decided to update my email address since I wasn't notified of your PM. And apparently when you do that it deactivates your profile. I'll take some pics tonight of them, dimensions are the same, just made a little different. Its how ever you want to ship; UPS, USPS, tracking, insurance, etc.
Ok ran into a problem taking the throttle bodies off. I could not get one of the bolts off the 96 elbow with hand tools. So naturally I used the impact, and the head snapped clean off. Got the throttle body off, but that bolt was extremely rusted. About a half inch is still sticking up, so maybe with some penetrate lube, heat, and a pipe wrench you might get it out, if not you can drill and tap. If this is a problem let me know.