What is the best cowl hood for my 87 ranger.I am thinking about a 3 "cowl.
I do not wnat a lift off or hood pins. I have heard good and bad on Champion hoods.
Should I just add a cowl scoop on factory hood?
Any experience?
Thanks
Larry
Cowl hoods
Moderator: MalcolmV8
Cowl hoods
87 XCab Lowered
306 CI World windsor Heads
Tr-Y Headers, Flowmaster,Mild
650 Quik fuel Holley/Edelbrock rpm perf
T-5
306 CI World windsor Heads
Tr-Y Headers, Flowmaster,Mild
650 Quik fuel Holley/Edelbrock rpm perf
T-5
Re: Cowl hoods
I know www.usbodysource.com use to have Ranger hoods. I did a quick search and did not see them but might be worth checking into. I know they use to have a one piece tilt front end for your truck. We almost ordered one for the boys truck at one time. Many of times I have kicked myself for not doing it. If it was me I would probably just put a scoop on the factory hood, gotta believe it would be much cheaper that way. That is if you can do body work at all.
Dirt is for Farming....Asphalt is for Racing
85 Ranger 5.0, GTP Engine, Carbed, AOD, 7.5 3:45 rear gear(for now)
77 Mustang II 302, C4, 8" rearend 3:00 gears, 4 point roll bar
73 Mustang Convertible, Bone Stock, 48,000 original miles
91 F-250 5.8W(really needs a 460) 4X4
2000 Mustang 3.8 V6, Bone Stock
2011 Ford Fusion (Momma's hot rod)
85 Ranger 5.0, GTP Engine, Carbed, AOD, 7.5 3:45 rear gear(for now)
77 Mustang II 302, C4, 8" rearend 3:00 gears, 4 point roll bar
73 Mustang Convertible, Bone Stock, 48,000 original miles
91 F-250 5.8W(really needs a 460) 4X4
2000 Mustang 3.8 V6, Bone Stock
2011 Ford Fusion (Momma's hot rod)
Re: Cowl hoods
Plowboy,
I think you are right I have an extra factory hood so this looks like a good fall project.
Larry
I think you are right I have an extra factory hood so this looks like a good fall project.
Larry
87 XCab Lowered
306 CI World windsor Heads
Tr-Y Headers, Flowmaster,Mild
650 Quik fuel Holley/Edelbrock rpm perf
T-5
306 CI World windsor Heads
Tr-Y Headers, Flowmaster,Mild
650 Quik fuel Holley/Edelbrock rpm perf
T-5
Re: Cowl hoods
I ordered mine from these guys, I believe
http://www.up22.com/
Not a hood, I bought a 2.5" cowl for a Fox body Mustang and grafted it into a second hood for my '97. The Mustang hood is about 8" longer than the Ranger, but the lines were parallel.
If you want a complete hood, there must be a few early hoods around. I don't recall if an '89 hood will work on an '88 Ranger.
http://www.up22.com/
Not a hood, I bought a 2.5" cowl for a Fox body Mustang and grafted it into a second hood for my '97. The Mustang hood is about 8" longer than the Ranger, but the lines were parallel.
If you want a complete hood, there must be a few early hoods around. I don't recall if an '89 hood will work on an '88 Ranger.
'97 Ranger Supercab.
Dropped 5/8
18X9,18X10 Bullitts 275/40 front and 295/35/18 rear
5.0 H.O. T5, 1.7rr, GT40 heads, GT40 intake, 65mm tb, 1 piece driveshaft, 3.55 Traction Lok, dual 2.5" Flowmasters, Cobra discs front and rear
Explorer power buckets and console
Dropped 5/8
18X9,18X10 Bullitts 275/40 front and 295/35/18 rear
5.0 H.O. T5, 1.7rr, GT40 heads, GT40 intake, 65mm tb, 1 piece driveshaft, 3.55 Traction Lok, dual 2.5" Flowmasters, Cobra discs front and rear
Explorer power buckets and console
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Cowl hoods
89 is different than the 88Teddyzee wrote:I ordered mine from these guys, I believe
http://www.up22.com/
Not a hood, I bought a 2.5" cowl for a Fox body Mustang and grafted it into a second hood for my '97. The Mustang hood is about 8" longer than the Ranger, but the lines were parallel.
If you want a complete hood, there must be a few early hoods around. I don't recall if an '89 hood will work on an '88 Ranger.
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
Re: Cowl hoods
the hoods are different ....
82 to 88 are the same
89 to 92 are the same
the diff is... the 82 - 88 have the square glass head lights and the 89 - 92 have the plastic headlights that wrap around the corners of the fenders ...
82 to 88 are the same
89 to 92 are the same
the diff is... the 82 - 88 have the square glass head lights and the 89 - 92 have the plastic headlights that wrap around the corners of the fenders ...
96 Ranger Extended cab - work in progress.. 5.0 out of a 90 Mustang GT..Tremec TKO-3550-2 with mid-shift conversion ..Explorer GT40 intake and fuel rails. X303 FMS cam . WP Jr alum heads . K&N air filter.lowered .Weld Drag Lites (or Weld Pro-Stars) .. a 8.8 with Auburn Pro ..Moser custom alloy street axles (31 spline) and a 3:73 gear.L&L engine mounts and oil filter adapter.Aluminum Rad from James Duff.
Peace from Oxford Miss.
Grumpy
Peace from Oxford Miss.
Grumpy
- faststang90
- Posts: 105
- Joined: Thu Jun 02, 2011 12:58 am
- SM: No
- Location: texas
Re: Cowl hoods
look here i been thinking about getting a hood from them for my 1994
http://www.andysautosport.com/ford/1983 ... _products/
http://www.andysautosport.com/ford/1983 ... _products/