My Build update
Posted: Fri Apr 22, 2011 5:23 pm
Well with help from some of you guys my build is getting close to complete. It started out as a 99 stepside show truck with a 2.5/5 sp stick. Now the engine is done and installed along with the new TCI trans. I bought a 89 virgin HO block and started from there. All other parts are new except the heads. TRW forged pistons, Comp roller cam,lifters,springs and rockers. GT40P heads with all new valves and machined for the comp springs. Edelbrock Intake and carb. TCI torque converter, and C4 trans. I did not have to alter my heater box and the original drive shaft fit perfect with the new 1330 yoke for the C4. The fuel tank has been removed and a fuel cell installed in the rear with a Carter electric pump and all new steel fuel lines 3/8". All wiring is in the factory harness after removing 33 wires. Our first show is May 28th and i will be there.
The bottom pic is what it started out as.
Thanks for the help and advise
Dave M
The bottom pic is what it started out as.
Thanks for the help and advise
Dave M