Motor is almost ready
Moderator: MalcolmV8
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Motor is almost ready
A few more parts and it will be going in my truck, getting excited! Don't mind the grudge on the valve covers, just have not got to them yet.
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Motor is almost ready
And another
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Motor is almost ready
Sure looks different than it did when I got it
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
Re: Motor is almost ready
Manual steering box?
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Motor is almost ready
Manual steering and brakes
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Motor is almost ready
Got the cam from Dave and it's in
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Motor is almost ready
I'm using a gear drive. There was a some cutting and grinding to make it fit.
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
- Dave
- Supporting Member
- Posts: 1524
- Joined: Fri Dec 10, 2004 4:36 pm
- SM: No
- Location: Central Wisconsin
Re: Motor is almost ready
Hey Mark,
Glad to finally put a face to the name! Malcolm and I like a little whine from up front also but it comes from the belt drive! Good talking to you and good luck with the build. Weather is just great over here for the next four days so you should have some good building days.
Dave - Later
Glad to finally put a face to the name! Malcolm and I like a little whine from up front also but it comes from the belt drive! Good talking to you and good luck with the build. Weather is just great over here for the next four days so you should have some good building days.
Dave - Later
'66'Ranchero 302/5 speed
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Motor is almost ready
Thanks Dave. I might be working on it again next week, I'd like to get it running within a couple weeks but it may not happen cause of the work schedule. I almost went with the blower but changed my mind and if I want more from the motor, I'll just spray it
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Motor is almost ready
Had some time to play with the Rager today so I started plumbing in the line lock and the new oil pressure guage. After that I went to bolt up the new clutch and found stripped holes in the flywheel ( I just had it resurfaced) where the pressure plate bolts up. I just ordered a new flywheel so it will be next week befor I can put the motor in.
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
- cgrey8
- Supporting Member
- Posts: 4055
- Joined: Fri Dec 10, 2004 8:23 pm
- SM: No
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Re: Motor is almost ready
Have you already purchased the flywheel? If not, I have a 50oz balanced 157T unused flywheel that I may not be able to use. If you are interested, I can get you pics of it.
...Always Somethin'
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Motor is almost ready
Darn it!! I almost posted here to ask if anybody had one. I just got one on ebay, only cost 73.00 for a new one. Thanks for the offer but I already pulled the trigger.
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
- cgrey8
- Supporting Member
- Posts: 4055
- Joined: Fri Dec 10, 2004 8:23 pm
- SM: No
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Re: Motor is almost ready
$73+s/h? If so, that's a pretty good deal.
I bought this flywheel for $70. It was pulled off a crate motor...never used. I wouldn't be looking to make anything off of it, just get my money out of it.
I bought this flywheel for $70. It was pulled off a crate motor...never used. I wouldn't be looking to make anything off of it, just get my money out of it.
...Always Somethin'
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Motor is almost ready
Mine cost me 72.99 with free shipping from a company that manufactures them. I felt like it was a good price.
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
- cgrey8
- Supporting Member
- Posts: 4055
- Joined: Fri Dec 10, 2004 8:23 pm
- SM: No
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Re: Motor is almost ready
...sounds like it. It makes me wonder if I didn't get that great of a deal for mine.
...Always Somethin'
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org