Super Swap long Tube Headers Price reduced to $200 ***SOLD
Moderator: MalcolmV8
- Warpig Racing
- Posts: 488
- Joined: Sun Nov 20, 2005 2:34 pm
- SM: No
- Contact:
Super Swap long Tube Headers Price reduced to $200 ***SOLD
Ones seen in the pic. Paint is not as good as some has baked off. These are slightly used. i got a set of ceramic coated ones and dont need these now. The drivers side collector is not the black painted one, it is the new ceremic one from my other set. i didn't want to redo the mods on the collector to get it to fit. $200 shipped to 48 states.
http://store.summitracing.com/partdetai ... toview=sku $439 at Summit. This is what i paid.
these are the ones.
[/url]
http://store.summitracing.com/partdetai ... toview=sku $439 at Summit. This is what i paid.
these are the ones.
[/url]
Last edited by Warpig Racing on Wed Sep 23, 2009 10:05 pm, edited 2 times in total.
Will
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
RE
What cylinder heads are you running? I've run a set of these before with a set of AFR's but on the installation notes is says that they will not work with Dart or Windsor heads. Any ideas as to why they won't work for that style of head?
2006 Chevy Uplander Mini-van (loser cruiser)
1998 Jeep Cherokee
6.5HP Troy Built push mower (A true hotrod)
1988 2WD Ranger XLT 2.9 5spd man.
1998 Jeep Cherokee
6.5HP Troy Built push mower (A true hotrod)
1988 2WD Ranger XLT 2.9 5spd man.
- Warpig Racing
- Posts: 488
- Joined: Sun Nov 20, 2005 2:34 pm
- SM: No
- Contact:
I have procomp heads. They are a replica of the Edelbrock. Not sure why they would not fit with the other heads?
I had to modify the drivers side collector on mine. Has to do with my custom motor mounts as seen in the pic and using the larger c6. Note that I also had to modify my steering shaft as the large donut shaped rubber dampner wouldnt clear either. Once again, probably due to the mounts that I made. See additional pics of this mod.
Note they are currently about the color of the 3rd image down.
I had to modify the drivers side collector on mine. Has to do with my custom motor mounts as seen in the pic and using the larger c6. Note that I also had to modify my steering shaft as the large donut shaped rubber dampner wouldnt clear either. Once again, probably due to the mounts that I made. See additional pics of this mod.
Note they are currently about the color of the 3rd image down.
Will
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
- Warpig Racing
- Posts: 488
- Joined: Sun Nov 20, 2005 2:34 pm
- SM: No
- Contact:
Dont the stock heads have angled plugs? I know that the older SBF have angled plugs. I am certain that the aluminum heads that I currently have have the angled plugs as well. I guess it could be the position of the plugs in those heads compared to the stock. I wish i had a set of Dart heads to be able to tell you.
Will
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
- Warpig Racing
- Posts: 488
- Joined: Sun Nov 20, 2005 2:34 pm
- SM: No
- Contact:
were you not able to use these headers with the procomp heads? The colloctor on the drivers side, I cut a small pie shape and rewelded the colloctor (not on this set for sale). That was so I would have a straight shot back which was necessary for me to make the exhaust w/o using a pipe bender.
BTW, how do you like the procomp heads? I'm personally dont think they are quality heads. As soon as I can justify it, I want to replace them with something else.
BTW, how do you like the procomp heads? I'm personally dont think they are quality heads. As soon as I can justify it, I want to replace them with something else.
Will
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
ive been using the turbos with the procomps, 210cc was the head size and i think the quality was comparable to any other aftermarket head, how much would you want for them, i might have a person interested in a set, they out run my j302 heads. ive torn apart my procomp heads and a set of victor jr heads and the quality was identical between the two in fact i probly had to do less prep work to the procomps.
twin turbo v8 menace
- Warpig Racing
- Posts: 488
- Joined: Sun Nov 20, 2005 2:34 pm
- SM: No
- Contact:
well i wont sell them till i have something else to put on them. Ill keep you in mind when i do. Seems like these are the 210cc intake that were also ported a little more.
Will
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
- Warpig Racing
- Posts: 488
- Joined: Sun Nov 20, 2005 2:34 pm
- SM: No
- Contact:
Re: Super Swap long Tube Headers Price reduced to $200 Shipped*
Price reduced to $200 shipped to 48 states. I'm cleaning out the garage.
Will
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
Re: Super Swap long Tube Headers Price reduced to $200 Shipped*
do you have a pic you can send me or a link or something as all the pix that you posted do not work...... what name brand are they? .... what size tubes? will they work on stock 5.0 heads? ........ the more info thee better for me as i am looking for a set of hedders now so i can at least start my swap and not have a set of open exhaust ports sittin there for dirt dobbers to build a nest in the ports and ruin the valves ... i got MOST of everything else to do this except for like 3 things.............. hedders being one .... lol
im goin ot have to bum around in my wifes 1998 Exploder AWD till i can finish mine so i havent started on it yet.... but gettin close !!!!!!!!
i got the L&L mounts ............. will the hedders work with them ??
im goin ot have to bum around in my wifes 1998 Exploder AWD till i can finish mine so i havent started on it yet.... but gettin close !!!!!!!!
i got the L&L mounts ............. will the hedders work with them ??
96 Ranger Extended cab - work in progress.. 5.0 out of a 90 Mustang GT..Tremec TKO-3550-2 with mid-shift conversion ..Explorer GT40 intake and fuel rails. X303 FMS cam . WP Jr alum heads . K&N air filter.lowered .Weld Drag Lites (or Weld Pro-Stars) .. a 8.8 with Auburn Pro ..Moser custom alloy street axles (31 spline) and a 3:73 gear.L&L engine mounts and oil filter adapter.Aluminum Rad from James Duff.
Peace from Oxford Miss.
Grumpy
Peace from Oxford Miss.
Grumpy
- Warpig Racing
- Posts: 488
- Joined: Sun Nov 20, 2005 2:34 pm
- SM: No
- Contact:
Re: Super Swap long Tube Headers Price reduced to $200 Shipped*
I just sent you a detailed email.
Will
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
-
- Posts: 256
- Joined: Sun Apr 13, 2008 12:59 pm
- SM: No
- Location: Upstate, NY
Re: Super Swap long Tube Headers Price reduced to $200 ***SOLD
I finally picked these up off of him. Will is a great guy to deal with, kept in touch and shipped them better then they would have come brand new.
Thanks abunch.
Thanks abunch.
- Warpig Racing
- Posts: 488
- Joined: Sun Nov 20, 2005 2:34 pm
- SM: No
- Contact:
Re: Super Swap long Tube Headers Price reduced to $200 ***SOLD
Thanks!.. i just want to see them put to good use. Got them on yet?
Will
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
-
- Posts: 256
- Joined: Sun Apr 13, 2008 12:59 pm
- SM: No
- Location: Upstate, NY
Re: Super Swap long Tube Headers Price reduced to $200 ***SOLD
No sir, but they do look great in the corner.
I'm still a long way from a running/driving truck. Gone through a few 'speedbumps' with this project but that's what makes it fun.
I thought it was a good deal, and when I get to that part, I've already got headers. I'll let you know when I do get them on.
Thanks for asking.
I'm still a long way from a running/driving truck. Gone through a few 'speedbumps' with this project but that's what makes it fun.
I thought it was a good deal, and when I get to that part, I've already got headers. I'll let you know when I do get them on.
Thanks for asking.