it did a little better. I have to pull the plugs and make sure the air/fuel is right.
its back alive
Moderator: MalcolmV8
- faststang90
- Posts: 105
- Joined: Thu Jun 02, 2011 12:58 am
- SM: No
- Location: texas
- faststang90
- Posts: 105
- Joined: Thu Jun 02, 2011 12:58 am
- SM: No
- Location: texas
- faststang90
- Posts: 105
- Joined: Thu Jun 02, 2011 12:58 am
- SM: No
- Location: texas
Re: its back alive
had it dynoed today and it was lean so they changed the jets. I told them the timing was locked out at 32 degrees and the changed it. we stopped it making 356 hp/339 tq to the tires. they said the 750 carb was to small and we may need a 850 or even a 950 carb
- faststang90
- Posts: 105
- Joined: Thu Jun 02, 2011 12:58 am
- SM: No
- Location: texas
-
- Posts: 10
- Joined: Mon Feb 24, 2014 8:09 pm
- SM: No
- Location: Stuttgart Ark.
Re: its back alive
What stall do you have in it? I am running a 5000 stall and I can't get but about 2800 at the line without it creeping. I am footbraking and am running the stock brakes on it. Looking at you pictures it looks like you have the headers turned down like an ole fenderwell type. That is the way I made mine. I wish I could post some pictures but not computer literate enough. Looks like you have picked up quite a bit over the past year. Good luck
Just looking for a win light in my lane.
- faststang90
- Posts: 105
- Joined: Thu Jun 02, 2011 12:58 am
- SM: No
- Location: texas
Re: its back alive
I post my pictures with photobucket copy and paste.
they said it should be around 4,000-4,500 stall when I had it done. the gear helped the most I think. I think I can get the 60 foot down and it would help the et. when I had it dynoed they asked if it was a lock up convertor because it was not wanting to come up very good. I'm going to go to a slick and I think they may help some too. it just a et street now.
they said it should be around 4,000-4,500 stall when I had it done. the gear helped the most I think. I think I can get the 60 foot down and it would help the et. when I had it dynoed they asked if it was a lock up convertor because it was not wanting to come up very good. I'm going to go to a slick and I think they may help some too. it just a et street now.