tranny ID
Moderator: MalcolmV8
- Dave
- Supporting Member
- Posts: 1524
- Joined: Fri Dec 10, 2004 4:36 pm
- SM: No
- Location: Central Wisconsin
Re: tranny ID
There should be a alum tag bolted to the top, number like 1352-???. I've got a chart that uses that number, tells what from and the torque rating.Another clue is the diameter of the input shaft. Most it not all the the 4-cylinders measure .59 while the v-8 measures .688. Input shafts are 7.41 long for the 4-cylinder and 7.18 for the v-8.
Dave
Dave
'66'Ranchero 302/5 speed
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
Re: tranny ID
'97 Ranger Supercab.
Dropped 5/8
18X9,18X10 Bullitts 275/40 front and 295/35/18 rear
5.0 H.O. T5, 1.7rr, GT40 heads, GT40 intake, 65mm tb, 1 piece driveshaft, 3.55 Traction Lok, dual 2.5" Flowmasters, Cobra discs front and rear
Explorer power buckets and console
Dropped 5/8
18X9,18X10 Bullitts 275/40 front and 295/35/18 rear
5.0 H.O. T5, 1.7rr, GT40 heads, GT40 intake, 65mm tb, 1 piece driveshaft, 3.55 Traction Lok, dual 2.5" Flowmasters, Cobra discs front and rear
Explorer power buckets and console