Motor
Moderator: MalcolmV8
-
- Posts: 58
- Joined: Sun May 22, 2011 11:36 am
Motor
Here are some pics of my motor build.
- Attachments
-
- This is one of my bare port polished E7 heads
- 0227111402a.jpg (37.55 KiB) Viewed 28267 times
-
- This is when i re-surfaced my valves
- 0302111423.jpg (36.86 KiB) Viewed 28267 times
-
- 0302111512b.jpg (41.92 KiB) Viewed 28267 times
-
- Posts: 58
- Joined: Sun May 22, 2011 11:36 am
Re: Motor
Here are some more pics of my motor
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Motor
Looks good, when are you planning to put it all together and have it running?
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
-
- Posts: 58
- Joined: Sun May 22, 2011 11:36 am
Re: Motor
I only have two small pieces to weld on the cab so hopefully i get it painted soon. I'm gonna shoot for getting the cab back on the frame in the next month or two. and I'm getting a universal wire harness. So by the end of winter I'm gonna try and just have the bed left. I like to have it done by this summer, but realistically it will probably be more like next summer because I keep gettin side tracked with other stuff.
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Motor
I can relate to having to put the toys off
, good luck to ya.
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
-
- Posts: 58
- Joined: Sun May 22, 2011 11:36 am
Re: Motor
Thanks. snow is around the corner and my plow truck had an electrical fire while just sitting in the driveway so i gotta fix that asap. and the fire was only a few months of re-painting it. luckly i got a wire harness and everything else i needed under the hood for $200 from a friend and i got it mostly working and back together just gotta re-paint the hood and right fender which i hope to make time to finish that this week.
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
Re: Motor
What's the specs on the motor above your bought?
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
-
- Posts: 58
- Joined: Sun May 22, 2011 11:36 am
Re: Motor
i built the motor and i haven't had it dyno tested, but its bored .40 over has port polished e7 heads from an early 90's mustang. the camshaft has an Advertised Duration 276/286, Lift .471/.471 and i put in valve springs and roller rocker arms that match the cam. i also ground and seated the manely vales myself too. for the intake i have an edlebrock performer, and i still gotta buy a carb. im hoping for at least 350hp, but i have seen motors with similar setups pushing 370 to 400, but i will just have to wait and see.
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
Re: Motor
Sounds good. Should be some fun.
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
-
- Posts: 58
- Joined: Sun May 22, 2011 11:36 am
Re: Motor
yeah. im a little nervous on breaking the motor in and everything because this is my first full engine build.