fuel pump inertial wiring
Moderator: MalcolmV8
fuel pump inertial wiring
does anyone know if this is the right wire to hook to my inertial. matt harwoods says it should be dg/y and my ranger is but the wire coming out of pin 19 on my computer is pink and black. i have a a9l computer
93 4X4 Long Box w/ 98 exployer 5.0, aod eld performer 650 carb
72 ford 3/4 4X4 HiBoy big block
72 ford 3/4 4X4 HiBoy big block
-
- Posts: 665
- Joined: Fri Dec 10, 2004 5:43 pm
- SM: No
- Location: Spring Hill, FL (1 hour N of Tampa)
its gotta come from the switched side of the relay to the inertia switch and pin 19 at the pcm. after the inertia switch it goes to the fuel pump. as long as its pin 19 at the pcm after the relay it doesnt matter what color the wire is as long as you can fix it if its broken later. make a note on your diagram.
95 2wd shortbed styleside with a 98 mountaineer 5.0
ported GT-40P heads, E-303 cam, Trick Flow Street Heat intake, 1.7 rollers, 24lb injs,155lph in-tank pump, built AOD, 2800 converter, Torque Monster headers, dropped 3/4 on 98 Cobra wheels. Eternal work in progress.
94 Ranger XLT b. 6/10/94 d.3/28/11 300,842 miles RIP
06 Fusion SEL
11 F150 FX2 SCrew 5.0 Coyote, Custom SCT X3 tune, Roush CAI
ported GT-40P heads, E-303 cam, Trick Flow Street Heat intake, 1.7 rollers, 24lb injs,155lph in-tank pump, built AOD, 2800 converter, Torque Monster headers, dropped 3/4 on 98 Cobra wheels. Eternal work in progress.
94 Ranger XLT b. 6/10/94 d.3/28/11 300,842 miles RIP
06 Fusion SEL
11 F150 FX2 SCrew 5.0 Coyote, Custom SCT X3 tune, Roush CAI
-
- Posts: 665
- Joined: Fri Dec 10, 2004 5:43 pm
- SM: No
- Location: Spring Hill, FL (1 hour N of Tampa)
right from the start circuit on the ignition switch to the pcm and neutral saftey switch, from the neutral saftey switch to the starter relay. if you run an automatic, you dont need to go to pin 46.
95 2wd shortbed styleside with a 98 mountaineer 5.0
ported GT-40P heads, E-303 cam, Trick Flow Street Heat intake, 1.7 rollers, 24lb injs,155lph in-tank pump, built AOD, 2800 converter, Torque Monster headers, dropped 3/4 on 98 Cobra wheels. Eternal work in progress.
94 Ranger XLT b. 6/10/94 d.3/28/11 300,842 miles RIP
06 Fusion SEL
11 F150 FX2 SCrew 5.0 Coyote, Custom SCT X3 tune, Roush CAI
ported GT-40P heads, E-303 cam, Trick Flow Street Heat intake, 1.7 rollers, 24lb injs,155lph in-tank pump, built AOD, 2800 converter, Torque Monster headers, dropped 3/4 on 98 Cobra wheels. Eternal work in progress.
94 Ranger XLT b. 6/10/94 d.3/28/11 300,842 miles RIP
06 Fusion SEL
11 F150 FX2 SCrew 5.0 Coyote, Custom SCT X3 tune, Roush CAI