Comp XE258HR12 cam, spring, and lifter kit on eBay

Discussion of all other Fords, Mustangs, F150s etc.

Moderator: MalcolmV8

Post Reply
User avatar
cgrey8
Supporting Member
Posts: 4055
Joined: Fri Dec 10, 2004 8:23 pm
SM: No
Location: Acworth, Ga (Metro Atlanta)
Contact:

Comp XE258HR12 cam, spring, and lifter kit on eBay

Post by cgrey8 »

For someone looking for a used Windsor performance roller cam that will idle well, pass emissions, and have some decent low-end torque, the Crane Powermax 2030 is a decent pick. It's listed on eBay for $165 Buy It Now...no bidding.
eBay>Crane 2030 Cam

BTW, no I'm not the seller. I just spotted it while looking for other stuff and thought I'd pass along the buy. Deals on used Crane Powermax cams don't come around often.
...Always Somethin'

89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller

Admin of EECtuning.org
User avatar
cgrey8
Supporting Member
Posts: 4055
Joined: Fri Dec 10, 2004 8:23 pm
SM: No
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: Crane Powermax2030 cam on eBay

Post by cgrey8 »

The seller dropped the price to $135. This is a GREAT deal on a very nice street cam...assuming your heads can handle the relatively high lift of this cam.
...Always Somethin'

89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller

Admin of EECtuning.org
User avatar
cgrey8
Supporting Member
Posts: 4055
Joined: Fri Dec 10, 2004 8:23 pm
SM: No
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: Crane Powermax2030 cam on eBay

Post by cgrey8 »

Cam still not sold and the price is dropped to $125. This is an exceptional deal for someone looking for their performance daily driver.

I did tell the guy I'd love to buy the cam for myself, but it's just not worth $125 TO ME since I already have the Crane 2020 and have no plans for a build after this 331 to use it in. So it'd actually be a shame for me to have it collecting dust in my basement if there's someone else out there that could actually run and enjoy it.
...Always Somethin'

89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller

Admin of EECtuning.org
User avatar
cgrey8
Supporting Member
Posts: 4055
Joined: Fri Dec 10, 2004 8:23 pm
SM: No
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: Crane Powermax2030 cam on eBay

Post by cgrey8 »

There's another Crane Powermax cam on eBay. It's a Powermax2020.
eBay>Crane Powermax2020

It was priced over $200, but has gradually been dropping in price. It was $185 for a while and it appears today it just dropped to $169. My guess is they'll continue to drop the price until it gets a bite. If you want/need one of these, this is a decent price. Anything less than $150, is a great price for one of these...assuming you need a high lift, low RPM/high torque cam. The 2020 is best suited for trucks and people looking for best off-idle performance, but not necessarily high RPM performance.
...Always Somethin'

89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller

Admin of EECtuning.org
User avatar
cgrey8
Supporting Member
Posts: 4055
Joined: Fri Dec 10, 2004 8:23 pm
SM: No
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: Crane Powermax2030 cam on eBay

Post by cgrey8 »

Another one of these cams up on eBay. This one is a:
Crane Powermax 2030. <-click

The best part is, this one is starting at $90. But there doesn't seem to be a Buy-It-Now option. It's a straight-up auction.
...Always Somethin'

89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller

Admin of EECtuning.org
User avatar
cgrey8
Supporting Member
Posts: 4055
Joined: Fri Dec 10, 2004 8:23 pm
SM: No
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: Crane Powermax2030 cam on eBay

Post by cgrey8 »

There's a Crane Powermax2030 AND Springs/retainers kit on ebay:
eBay>Crane Powermax2030 and spring kit

Good stuff for someone that needs this kind of cam and can use it.
...Always Somethin'

89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller

Admin of EECtuning.org
Toomanycars
Posts: 83
Joined: Fri Apr 13, 2012 6:53 pm

Re: Crane Powermax2030 cam on eBay

Post by Toomanycars »

cgrey8 wrote:There's a Crane Powermax2030 AND Springs/retainers kit on ebay:
eBay>Crane Powermax2030 and spring kit

Good stuff for someone that needs this kind of cam and can use it.
I plan on bidding on that one
User avatar
cgrey8
Supporting Member
Posts: 4055
Joined: Fri Dec 10, 2004 8:23 pm
SM: No
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: Crane Powermax2030 cam on eBay

Post by cgrey8 »

An interesting find on eBay. It's not a Crane, but a Comp Cam kit. It's an XE258HR-12 with springs AND new Comp hyd lifters!!! Reserve of $350 ain't bad for this kit. If you need a "torque" cam, this is a GREAT find:
Hydraulic Roller Cam, Lifters, and Springs for Ford 302
...Always Somethin'

89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller

Admin of EECtuning.org
Post Reply