V8-Ranger.com

gona stay somewhat stock for now .. once dropzone and my 4x4 are done this one may get an upgrade.

I still need a passenger side box fender

94 .. 4.0 auto .. http://i300.photobucket.com/albums/nn31/Toomanycars/IMG952013061595135631_zpsd8f1a94b.jpg http://i300.photobucket.com/albums/nn31/Toomanycars/IMG952013061595135623_zps6410de2b.jpg http://i300.photobucket.com/albums/nn31/Toomanycars/IMG952013061595135650_zpsca556147.jpg I think this...

How do you put oil in it? I don't see an oil fill hole. Pour it slowly down the dipstick tube? LOL the oil thats in it now was filled threw the distributor hole ..haha .. I have a breather/filler hole that i will be installing just weighting for it to get here so I can make sure i have the right ho...

Why didnt you like the convertible mounts?? I dident like them because I dident like the position of the motor with them .. I used the factory 4.o mounts.. BUT I did not use the factory holes in the frame .. what I did was weld up the cross member and with a hallow motor (block and heads and intake...

the motor is finally in for the last time .. I put the new valve covers on and slid the motor in and there was a few places were I had to do some mods . When I made my motor mounts i made it so the motor was as far down and back as possible .. the new valve covers are bigger so they contacted the fi...

nice truck.... welcome to the site ..once your done with your remodel LOTS more pics would be great..

mine had the same removeable tee in the back and the 90 on the front .. what i did was remove the tee and cut the 90 as close as i could . I plan on drilling out whats left of the 90 and taping it that way i can just screw in some dead ends as plugs ...

well cgrey8 they fit just fine with a few small mods .. I had to remove the two vacuum ports from the far side of the upper intake .. I fingure that I will be able to get by just fine with out them . theres two vacuum trees in the middle that I can use... heres some pics of the whole deal.. http://i...

well my valve covers showed up today .. they look pretty good nice and straight,.

ordered these today hope the intake clears them with out a spacer but we'll see

http://www.ebay.com/itm/160847133537?ss ... 1497.l2648

so to answer my own question ... I grabed the fuel rails and lines off the donor 97 mercury mountaineer and they are a perfect match for the 91 4.0 lines.. you can see in this pic how they stay kind of hidden by coming out the back side of the intake and down to the stock 4.0 lines .. http://i300.ph...

well i got everything off but while pulling the timing cover off the bolt hole by the coolant passage cracked so now im on the hunt for another..

few updates ... for a top end gasket kit from felpro and head bolts as well ... my heads are back from the machine shop.. complete and clean.. had a 3 angle valve job, new valve gides , new springs and retainers they machined everything smooth and put a coat of royal ford blue on them ... http://i30...