V8-Ranger.com

I could not make it work it was about 1 1/2 to tall

I'm wanting to got to manual brakes on my 1994 ranger. do you think this would work?
https://lmr.com/item/ASP-029400/1987-93 ... ersion-Kit

no I have the one from james duff its not that old and I have a electric water pump. I have changed the plates out on the water neck to slow down or speed up the water but when the truck goes down the track 2 times it takes a little time to cool off. I don't have a shroud but I have the fan on all t...

I have a 1994 ranger with a v8 and its getting hotter than I would like it too. so I ordered a 3 core mustang radiator. has any one tried to make one work. I have already cut the front to get the motor In and out faster.

had it dynoed today and it was lean so they changed the jets. I told them the timing was locked out at 32 degrees and the changed it. we stopped it making 356 hp/339 tq to the tires. they said the 750 carb was to small and we may need a 850 or even a 950 carb

11.80@115 mph

https://youtu.be/kDs8KxKn9fE

it did better but after the pass something happened and it started to leak transmission fluid.

it did a little better. I have to pull the plugs and make sure the air/fuel is right.

yeah I got the rear end on the springs and the sway bar parts would only go one way.

any one have any pictures of a rear sway bar installed on a 1994 ranger. I pulled the rear end out and not sure how every thing went.

I don't think any one makes one that goes from high pressure to low pressure.

I got the spool, 4.30 gears, 9 inch ends and new brakes and tubes welded up. just have to install it.

pulled the rear end out this morning and dropped it off. I'm having the tubes welded and doing a rear cap. they said around a month till I get it back.

for safety reasons is they only reason why. at first I was told about the same price to build the 8.8 as it was for a 9 inch. so if im going to pay out a lot of money. im going to get the best I can but the 8.8 is cheaper by the time I add in all the shipping and stuff.

I found a shop to do 9 inch ends, gear, spool, 33 spline axles, brakes for around 2,600. they said it was like a 3-4 week wait on axles.