V8-Ranger.com

Jet sizes, stock for your carb. are Pri 71 Sec 80 stock power valve is a 6.5 if you ger holley parts put a 125 in front of the # like the power valve will be 125.65 hope this helps

forgot the rpm you should check it at is around 3000 max you can watch it with the timming light

small block ford ( ie302) should not have over 32to36 degres total advance, take the base timing and subract from the total and that is what your vac and mechanel total should be say 12 base so the adv.should be 20 to 24 the dist has around 12 to 15 in it depending what cam and springs are in it. ho...

chris ,the back two sensors montor what the cats are doing ie if they are working or not that is why they are different
Bill

the part # for the muffler with 2.5 in and out 11386 and for 2. 1/4 in and out 11385 those are two in and two out the muffler body is 14 in. long the cat #s are 2.1/5 93016 and for 2.1/4 93015 thease are cal approved high flow cats with air induction in between the beds or as know 3 way cats hope th...

The cats are 9300 series and the muffler # i will get in the morning and post for you it is 2.5 in and out
bill

To answer 87sc302 sQuestion i run a manga flow duel in and out its quite in the cab and you have to be a car guy to tell going thou the parking lots I dont like the flow master tone eather .im runing explor cast manifolds with manga flow cats 2.5 pipes in and out . new moter to go in 345 hp moterspo...

Ford has lots of TSBs on heater core noise they sell a restecor for the noise it goes in the heater hose and slows down the coolent flow this was frist noticed in the late 60s and still today the latest is the super dudy trucks any ford dealer should have them in stock . they push in the hose and a ...

You non California people have it made , out here we cant go back (ie 93 eng.in 94 truck)mine is a 94 splash with 94 mustang 5.0 and 4r70w trans the proplem with94 is that ford put the eng harness in with the body harness but it can be done get the wiring books for your 94 I would like to go to the ...

I got that trans in mine and i'm useing the stock speedo. cable with only a ford speed sensor mine is a 94 ranger xcab 94 must 5.0 with extras.
hope this helps
BB

keep in mind that the 94 eng. harness is not stand alone you will have to mate up a 94 must harness to make it work. 94 extra cab 5.0 4r70w trans it was a job but worth it . the other thing is that ford changer the injector wiring in 94 some of the inj. are aon different pins at the pcm. hope this h...

You want cheep use the explorer plates that are on the block and the stock 3.0 or 4.0 motor mounts i've got almost 60k on mine and no prob. mine is a 94 extedcab 2wd with a 94 mustang 5.0 cobra intake p/s a/c and we have smog in Ca. and it's all legal with the state
fordnut66