Search found 103 matches

by faststang90
Thu Jun 09, 2016 10:09 pm
Forum: V8 Ranger General Discussion
Topic: any one try this
Replies: 8
Views: 2310

Re: any one try this

thanks I think if they would have got the stall right it would be a low low 11 high or a high 10 second pass. I may pull the motor this summer and get the stall fixed. I'll just have to wait and see how hot it gets in Texas this summer. plus I want to have my headers recoated because they are rustin...
by faststang90
Tue Apr 05, 2016 5:47 am
Forum: V8 Ranger General Discussion
Topic: i ordered a new 750 carburetor
Replies: 5
Views: 1560

Re: i ordered a new 750 carburetor

it did the 7.18@ 95.37mph 1/8 mile and before the best was a 7.342@ 94.91 mph. the plugs look very lean after the first pass so I went up a few jet sizes and it was still lean. I ran over a nail at the track so I had to fix that and then it was time to race so the last pass was still lean and it ran...
by faststang90
Sun Apr 03, 2016 5:51 am
Forum: V8 Ranger General Discussion
Topic: i ordered a new 750 carburetor
Replies: 5
Views: 1560

Re: i ordered a new 750 carburetor

went to the track and it ran a faster 1/8 time but the track did not print all of the ticket. then when it did give us the full pass it was saying the mph was around 55 mph -70 mph. I did a 1/8 to 1/4 and it came up with like a 11.20. we was running the 11.00 class at the track and we came in 3rd pl...
by faststang90
Sat Mar 12, 2016 9:02 pm
Forum: V8 Ranger General Discussion
Topic: i ordered a new 750 carburetor
Replies: 5
Views: 1560

i ordered a new 750 carburetor

I ordered a new 750 hp holley today. the one I had on before was a pro form center and on the dyno the guy said he never had one make any power but it made 508 hp at the flywheel. so I sure hope it picks up from the 508 hp
by faststang90
Wed Feb 17, 2016 3:10 pm
Forum: V8 Ranger General Discussion
Topic: its back alive
Replies: 20
Views: 4880

Re: its back alive

I post my pictures with photobucket copy and paste. they said it should be around 4,000-4,500 stall when I had it done. the gear helped the most I think. I think I can get the 60 foot down and it would help the et. when I had it dynoed they asked if it was a lock up convertor because it was not want...
by faststang90
Sat Feb 06, 2016 5:44 pm
Forum: V8 Ranger General Discussion
Topic: any one try this
Replies: 8
Views: 2310

Re: any one try this

I got a new aerospace master cylinder because the brakes was not holding that good to do a burn out. they said this master cylinder was •60/40 Front to Rear Brake Bias. so i guess 60% of the brakes go to the front. http://i91.photobucket.com/albums/k281/faststang902000/new%20master%20cylinder_zpsl1j...
by faststang90
Wed Feb 03, 2016 7:26 pm
Forum: Ford Performance
Topic: Stock block and too much power...
Replies: 13
Views: 6995

Re: Stock block and too much power...

before I did mine the motor shop checked to make sure it was a good block, no cracks. I know some people say that main cap supports just hold the block together after they break. I think it stops parts from moving. I also think if you have a weak crank not 4340 weak rods things move which would caus...
by faststang90
Tue Jan 26, 2016 7:30 pm
Forum: V8 Ranger General Discussion
Topic: any one try this
Replies: 8
Views: 2310

Re: any one try this

after the brakes was done we made a pass at the track and it picked up best time now is a 11.53@116 mph. it was a 11.65@116 http://i91.photobucket.com/albums/k281/faststang902000/best%20pass%201-15_zpsf8c2d6jv.jpg http://i91.photobucket.com/albums/k281/faststang902000/th_11.65_zpsjljr492w.jpg
by faststang90
Tue Jan 26, 2016 7:23 pm
Forum: V8 Ranger General Discussion
Topic: any one try this
Replies: 8
Views: 2310

Re: any one try this

on a few passes at the end of the track when you pushed the brakes the truck would die. we was told they was thinking we had manual brakes when the motor was built. we was thinking the power brakes vacuum was to much for the motor. the camshaft on the motor is very large .672 lift camshaft. it was c...
by faststang90
Sat Jan 16, 2016 1:48 am
Forum: V8 Ranger General Discussion
Topic: its back alive
Replies: 20
Views: 4880

Re: its back alive

it did better but its not wanting to stall up much higher than like 2500 rpm.

Image
by faststang90
Fri Jan 08, 2016 9:15 pm
Forum: V8 Ranger General Discussion
Topic: any one try this
Replies: 8
Views: 2310

Re: any one try this

got it done had to drill out the holes in the fire wall. going to bleed the brakes tomorrow and see if they work.

Image
by faststang90
Sun Jan 03, 2016 9:10 pm
Forum: V8 Ranger General Discussion
Topic: any one try this
Replies: 8
Views: 2310

Re: any one try this

I tried the strange one and it was the one that you had to drill the brake pedal. the rod on that one was built into it and it was too short. I have another one coming that has a adjustable all thread for the rod. it also has the rod that goes on the stock pin on the brake pedal. I think it will wor...
by faststang90
Wed Dec 23, 2015 8:39 pm
Forum: V8 Ranger General Discussion
Topic: any one try a 1993 mustang radiator
Replies: 3
Views: 1168

Re: any one try a 1993 mustang radiator

I could not make it work it was about 1 1/2 to tall
by faststang90
Tue Dec 22, 2015 8:07 pm
Forum: V8 Ranger General Discussion
Topic: any one try this
Replies: 8
Views: 2310

any one try this

I'm wanting to got to manual brakes on my 1994 ranger. do you think this would work?
https://lmr.com/item/ASP-029400/1987-93 ... ersion-Kit