V8-Ranger.com

yeah i know what you mean about the trim. i wasn't gonna have any wood in mine until i found that steering wheel and after i decided to get that i built the console. i am also going to keep going with the wood by making wood arm rests/ door handles and making a wood floor in the bed.

it set me back a pretty penny but i kinda wanted to keep an old school look and the bucket seats just weren't what i was looking for in this truck. you sure did pull it off in your truck tho. you kept an old school look with the buckets and it really turned out great.

looks real good just got my bench seat re-upholstered after i customized it to fit with the manual transmission i will have to try and post some pics

thanks for all the help.

thanks. what was your issue with the hub and what did you have to do on the hub

i have an 85 ranger with a djm dream beams and rear flip kit and i was wondering what size rims and tires i can use. i need to know tire size, rim size, backspacing, and off set. thanks

this is the fitting and you can't see because the o-ring is covering it but there is a lip on the fitting the arrow in the pic is pointing at it. the lip will need to be filed down slightly to fit in the slave and master because i think the fitting was meant for a jeep and its the only one i could f...

this is my set up. its an external slave from an 84 ranger with a 2.9 v6. The line that goes from the clutch slave to the clutch master cylinder i used a braided stainless steel line with an adapter piece from russel performance this is the part from summitracing.com Russell Performance 640281 - Rus...

I know this isn't a v8 question, but I recently got an 04 ranger with a 2.3 5spd. I've had it for a few months and the head gasket went out. i was wondering if there are any other parts i should replace while everything is apart. any advice is much appreciated.

thanks. i have a lot of time put into everything. hopefully i can get it all wired up at some point before the summer comes to an end.

here is after i painted the cab

i haven't posted anything in a while so here is what ive been up to.

nice truck cant wait to see the finished product. are you gonna paint the whole truck that royal blue color?

im thinking of getting a hydraulic fitting with a ball and socket in it so that the hose will have plenty of room between the distributor

i have a edlebrock performer 289 intake manifold and i had a homemade 90 before which was obviously too bulky too fit so i tried a straight fitting from mr gasket and that barely cleared. my other concern was when i time the motor im worried about having enough room to move the distributor because i...